Home //

Torque Meter

Torque Meter

Price: ₹0

Brand: IMADA-Japan

For Power Drivers |  Torque Control

I-8/I-80 is torque tool tester with 80cN-m(800mN-m) to 800cN-m(8.0N-m) capacity. It is ideal for the daily torque maintenance of motor screw drivers and torque drivers with simple operation.


  • Measures torque (rotating force) for motor screwdriver and torque driver easily
  • Ideal for quality control with clear pass-fail results (lamp lights)
  • Easy data management with data output function connecting PC with USB



I - 8

I - 80

Measuring range*1

0.20~80.00 cN-m

0.020~8.000 N-m

0.020~8.000 kgf-cm

0.20~80.00 kgf-cm

0.020~7.000 lbf-in

0.20~70.00 lbf-in

2.0~800.0 cN-m


+/- 0.5% (reading value) or +/-3digit in less than 499 digit.


4 digits LCD display

Measuring direction

CW-CCW (Right turn /Left turn)

Measuring mode

P-P(Peak-hold), T-R(Track), P-D(Peak-down),C(real time data


Upper/Lower value setting

Upper/ Lower value are able to be set in the measuring range.

Pass-fail decision

Pass/Fail can be check in the measuring range.(P-P mode)

GOOD (Pass)…Green lights, NG( Fail)…Red blinks

Max./ Min./Ave. display

Display stored Max. / Min. /Ave. / Number of measuring values.

Real time data output

Output applied torque approx. 1/180 sec each.

Internal memory

800 data

Output data

ASCII (baud rate 19200 bps)

Auto zero reset function

Automatic clear value function in each 0.1~3.0 sec (The setting is

possible from 0.5 sec each). Manual zero reset setting is at 0.0 sec.

Zero Reset function

Auto or Manual (only pressing the button.)


Ni-MH 300 times

Auto power-off

Auto power-off in 10 minutes with no operation.

Charging time/ Usable time

Approx.3 hours/ Approx. 12 hours continuous use after full charge.

Socket joint part

(Detecting parts shape)

Square 20 mm / Square 9.5 mm

Included items (1 each)

Driver adapter OW-025/OW-10

Driver adapter OW-20/OW-60

Attaché case, battery charger, inspection certificate (*2), calibration certification (*2), traceability system diagram (*2).