Horizontal | Lo-Mid Force | Hi Force | Digital Speed Ctrl | Multi Function | Displacement OPT
Horizontal Motorized Test Stand MH2 series is standard type with 500N to
2500N capacity. It is functional yet user-friendly model with easy
operation. The horizontal design allows applying force horizontally. Its
rugged design provides solutions for complex testing.
Achieves high repeatability with constant testing speed
and position, high rigidity, and allows applying force horizontally due
to horizontal design
Handles various testing such as durability or
compression testing with digital setting of speed, counter function
(number of tests to repeat), and timer function (pausing time)
Handles a wide range of testing applications to meet
your testing requirements with options such as -FA (inner linear scale)
Enhances testing efficiency and safety with option -CN
(I/O for external signals), allowing for communication for interlock and
starting operation, etc.
[Specifications]
Model
MH2-500N
MH2-2500N
Capacity
500N
2500N
Speed
Digital 10 to 300mm/min [10 - 20mm/min: by 0.5mm/min] [20 - 100mm/min: by 5mm/min]
[100 - 300mm/min: by 10mm/min]
Max. Sample Height (*1)
Approx. 245mm
Approx. 340mm
Rigidity
[Standard models] 0.5mm or below
Stroke Limit
Controllable with horizontal knob
Measuring Modes
Manual / Jog / Cycle mode
Functions
Counter (number of tests to repeat): Max. 65535 times Timer (pausing time): Up to 99 min 59 sec 9 (by 0.1 sec)
Control
Emergency stop, force control (*2), overload prevention (*2, *3)
Operating temperature humidity
0 to +40 degree Celsius
35 to 70% (avoid condensation)
Voltage
AC100 to 240V, 50/60Hz
(Select from 100, 120 and 230V. Accessories are provided accordingly.)
Mechanical Force Gauge: FB, PS, PSM series Digital Force Gauge: DST, DSV, ZTS, ZTA series (1000N or lower)
Load cell: DPU series (500N or lower)
Mechanical Force Gauge: FB, PS, PSM PSH series
Digital Force Gauge: DST, DSV, ZTS, ZTA series
Load cell: DPU series (500N or lower), DPU
series (1000~5000N)(*7)
*1 Max. sample height refers to the distance between the table and the tip of force gauge measuring shaft when the head is at the top. (With up to 1000N model of ZTS/ZTA series)
*2 ZTS/ZTA series force gauge and optional cable CB-528 are required.
*3 It does not guarantee complete protection against overloading.
*4 Add the option code after the model name to complete the model with options.
e.g. When adding long stroke option to MH2-500N … Model: MH2-500N-L
*5 Capacity is reduced as below by some speed change options of MH2-500N.
-V600 capacity 250N, –V900 capacity 150N
*6 Ensure to use within the capacity of force gauge and test stand regardless of the mountable models.
*7 Mounting block is required to be attached to the DPU series (1000~5000N)
[User Mounted Unit (only for MH2-2500N)]
OP-MH225-S：Length Scale
OP-MH225-FA：FA version *1
It digitally indicates travel distance of a force gauge.
It builds a linear scale into a test stand to output travel distance of a force gauge and allows to utilize it for
analysis of force-displacement relations.
* Requires to fix the unit to current MX2-5000N by yourself.
* Amplifier such as ZTA or FA Plus2 (sold separately) or Software are required to record measuring value of linear scale.
